Barometer & Altimeter Pro PC 용

다운로드 Barometer & Altimeter Pro PC 용

에 의해 게시 Steffen Bauereiss


평점:

5.0/5
5
보낸 사람 1 평점


에디터의 리뷰

1. Please Note that on older devices such as the 4S, 5, 5S and 5C as well as on any iPod Touch and iPad Models older than iPad Air 2 or iPad Mini 4 as well as the Apple Watch 1 and 2, this app will not be able to read barometric pressure values and not display any useful information.

2. This app uses the barometric pressure sensor built into all the newer iPhone, iPad and Apple Watch Models sold after 2016 with few exceptions.

3. This App features a Barometer for weather, an Altimeter for outdoor activities, a barometric Trend and a Notification Center Widget.

4. Keep an eye on the barometric pressure and be your own weather forecast! This little app uses only GPS (optional) and the new barometric pressure sensor to calculate the barometric pressure used in weather forecasts.

5. Just set your reference pressure and altitude in order to use the Altimeter for checking how high up the mountain you have climbed (works for other activities too).

6. All basic features, the Barometer, the Altimeter, the Trend and the Widget are completely free to use for everyone and are fully functional at maximum accuracy available.

7. The new iPhones have a barometric pressure sensor built in so this app works completely without internet.

8. The Altimeter helps you track your altitude changes based on the change of pressure.

9. Even without the optional In-App-Purchase this is a fully functional Barometer with absolutely no draw-backs and all important features accessible.

10. - Manual altitude setting or automatic altitude updates based on GPS for the Barometer.

11. The only features with restricted access via In-App-Purchase are listed at the end under "Pro Features".



스크린 샷

       


다운로드 및 설치 방법 Barometer & Altimeter Pro 귀하의 PC 및 Mac에서



Windows에서 사용할 수있는 앱과 같은 일부 앱! 아래에서 확인하십시오.

SN 다운로드 리뷰 개발자
1. Barometer Digital 다운로드 /5
0 리뷰
Agredo Application

최상의 대안: 호환되는 PC 앱 또는 대안 확인


다운로드 평점 개발자
barometer altimeter pro 앱 또는 대안 다운로드 5/5
1 리뷰
5
Steffen Bauereiss

또는 아래 가이드를 따라 PC에서 사용하십시오. :

PC 버전 선택:

  1. Windows 7-10
  2. Windows 11

설치하고 사용하고 싶다면 Barometer & Altimeter Pro 앱을 PC 또는 Mac에 설치하려면 컴퓨터 용 데스크톱 응용 프로그램 에뮬레이터를 다운로드하여 설치해야합니다. 우리는 당신이 어떻게 사용하는지 이해할 수 있도록 열심히 일했습니다 app 아래의 네 단계를 거쳐 귀하의 컴퓨터에서 사용할 수 있습니다 :


1 단계 : PC 및 Mac 용 Android 에뮬레이터 다운로드

확인. 먼저 첫 번째 것들. 컴퓨터에서 응용 프로그램을 사용하려면 먼저 Mac 저장소 또는 Windows 응용 프로그램 저장소를 방문하여 Bluestacks 응용 프로그램이나 Nox App 을 클릭하십시오. 웹에있는 대부분의 자습서는 Bluestacks 응용 프로그램을 권장하며 컴퓨터에서 Bluestacks 응용 프로그램을 사용하는 데 어려움이있을 경우 쉽게 온라인 솔루션을 쉽게 찾을 수 있기 때문에 Bluestacks 응용 프로그램을 권장합니다. Bluestacks Pc 또는 Mac 소프트웨어 여기 를 다운로드 할 수 있습니다.  


2 단계 : PC 또는 Mac에 에뮬레이터 설치


3 단계 : Barometer & Altimeter Pro PC의 경우 - Windows 7/8 / 10 / 11

설치 한 에뮬레이터 애플리케이션을 열고 검색 창을 찾으십시오. 일단 찾았 으면 Barometer & Altimeter Pro 검색 막대에서 검색을 누릅니다. 클릭 Barometer & Altimeter Pro응용 프로그램 아이콘. 의 창 Barometer & Altimeter Pro Play 스토어 또는 앱 스토어의 스토어가 열리면 에뮬레이터 애플리케이션에 스토어가 표시됩니다. Install 버튼을 누르면 iPhone 또는 Android 기기 에서처럼 애플리케이션이 다운로드되기 시작합니다. 이제 우리는 모두 끝났습니다.
"모든 앱 "아이콘이 표시됩니다.
클릭하면 설치된 모든 응용 프로그램이 포함 된 페이지로 이동합니다.
당신은 아이콘을 클릭하십시오. 그것을 클릭하고 응용 프로그램 사용을 시작하십시오.




PC 용 호환 APK 받기


다운로드 개발자 평점 점수 현재 버전 호환성
APK 확인 → Steffen Bauereiss 1 5 4.1.1 4+
다운로드 Android


보너스 : 다운로드 Barometer & Altimeter Pro iTunes에서

다운로드 개발자 평점 점수 현재 버전 성인 랭킹
무료 iTunes에서 Steffen Bauereiss 1 5 4.1.1 4+


PC를 설정하고 Windows 11에서 Barometer & Altimeter Pro 앱을 다운로드하는 단계:

Windows 11에서 모바일 앱을 사용하려면 Amazon Appstore를 설치해야 합니다. 설정이 완료되면 선별된 카탈로그에서 모바일 앱을 검색하고 설치할 수 있습니다. Windows 11에서 Android 앱을 실행하려는 경우 이 가이드가 적합합니다..


  1. 컴퓨터가 호환되는지 확인: 최소 요구 사항은 다음과 같습니다.
    • RAM: 8GB (최저한의), 16GB (추천)
    • 저장: SSD
    • Processor:
      • Intel Core i3 8th Gen (최소 이상)
      • AMD Ryzen 3000 (최소 이상)
      • Qualcomm Snapdragon 8c (최소 이상)
    • Processor Architecture: x64 or ARM64
  2. Barometer & Altimeter Pro 에 이미 기본 Windows 버전이 있는지 확인하십시오. 여기서 하세요 ». 기본 버전이 없으면 3단계로 진행합니다.
더 읽기 ❯


기능 및 설명

This app uses the barometric pressure sensor built into all the newer iPhone, iPad and Apple Watch Models sold after 2016 with few exceptions. You need one of these newer devices to use this App. See below which older iPhone, iPad and Apple Watch without this sensor are not supported! This App features a Barometer for weather, an Altimeter for outdoor activities, a barometric Trend and a Notification Center Widget. Even without the optional In-App-Purchase this is a fully functional Barometer with absolutely no draw-backs and all important features accessible. Always without ads! (See "Pro Features" at the end). No internet connection required, no data transmitted - runs on your device only! Keep an eye on the barometric pressure and be your own weather forecast! This little app uses only GPS (optional) and the new barometric pressure sensor to calculate the barometric pressure used in weather forecasts. The new iPhones have a barometric pressure sensor built in so this app works completely without internet. The handy marker helps you keep track of changes in the barometric pressure and let's you predict weather changes! Please realize, that a single barometric pressure reading is not enough to tell the current weather situation but the barometric pressure and its change over time is a very good indicator for weather changes! Now you can also see the trend in barometric pressure with graph charts displaying the measurements taken during the last 30 days! (6h, 12h, 24h, 3d, 7d, 14d, 30d) The Altimeter helps you track your altitude changes based on the change of pressure. Just set your reference pressure and altitude in order to use the Altimeter for checking how high up the mountain you have climbed (works for other activities too). The App does not use GPS for the Altimeter. Please Note that on older devices such as the 4S, 5, 5S and 5C as well as on any iPod Touch and iPad Models older than iPad Air 2 or iPad Mini 4 as well as the Apple Watch 1 and 2, this app will not be able to read barometric pressure values and not display any useful information. The first generation 4-inch iPhone SE is not supported - the new SE (2020) is! All basic features, the Barometer, the Altimeter, the Trend and the Widget are completely free to use for everyone and are fully functional at maximum accuracy available. No ads! The only features with restricted access via In-App-Purchase are listed at the end under "Pro Features". Those are nice to have features for power users or those that want to show their support for the App! Features (free for everyone) - Barometer for weather - Altimeter for outdoor activities - HomeScreen Widget (iOS 14 and newer) - Today-View Widget (all Versions) - Watch App - Up to 30d trend visualised with graphs - Interactive timeline on the trend graphs - No internet connection required since the sensor is built into the new iPhones and iPads - Supports 6 different pressure units - Support for 2 different altitude units - Analog Barometer with support for all 6 units - Configurable "displayed accuracy" / number of decimals - Supports setting a custom marker so you can track changes in barometric pressure - Manual altitude setting or automatic altitude updates based on GPS for the Barometer. - GPS Correction. In case your GPS seems to always be 'off' a little you can now fix this easily. - Portrait and Landscape support - No ads! No data collection beyond your device (history and settings). No web communication at all. Pro Features (one time In-App Purchase required) - Change the Barometer Face - Fishing Barometer - Two scales on the Barometer - Data export in CSV Format



추가 응용 프로그램 Steffen Bauereiss





최고의 앱 - Weather